.png)
Delta Sama Jaya Sdn Bhd
23G & 23M, DSSB Building,
Jalan Perdana 6/8,
Pandan Perdana,
55300 Kuala Lumpur,
Malaysia.
+603 9286 6328
+603 9281 3778
+603 9282 4007
+603 9281 3778
+603 9282 4007
+603-9287 0705
DS/MS/VA Voltage Detectors
| Previous | 2 / 5 | Next |
DS/MS/VA Voltage Detectors
| Item Code |
| DSSB- SSE - PEE - DS / MS / VA |
Suitable for detecting up to 36kV, the Westminster DS/MS/VA Voltage Detector comprises five main components, each rated to suit the specific application, as follows:
Contact
To establish contact with the live conductor. Available as mushroom, pointer or ‘Y’ contact to suit the application.
To establish contact with the live conductor. Available as mushroom, pointer or ‘Y’ contact to suit the application.
Extension
Manufactured and tested to suit the application voltage and provide calibrated capacitance to operate the detector. Four types of extension are available, to suit the specific application voltage range. These may be attached in line to the main body or at an angle using an adaptor.
Manufactured and tested to suit the application voltage and provide calibrated capacitance to operate the detector. Four types of extension are available, to suit the specific application voltage range. These may be attached in line to the main body or at an angle using an adaptor.
Adaptor
Two types of adaptor are available, these connect the extension to the main body of the detector. A 90o adaptor is available for applications where it is preferential to stand directly below the point of contact with the extension at right angles to the main body, allowing a clear view of the application to the conductor/busbar. Alternatively, a 60o adaptor is also available for applications where it is preferential to hold the detector at an inclined angle perpendicular to the conductor/busbar, to improve visibility of the Westminster DS/MS/VA detector. For applications where a direct (in-line) application is preferred e.g. inside a cabinet with restricted access, the extension can be directly screwed into the main body omitting the adaptor.
Two types of adaptor are available, these connect the extension to the main body of the detector. A 90o adaptor is available for applications where it is preferential to stand directly below the point of contact with the extension at right angles to the main body, allowing a clear view of the application to the conductor/busbar. Alternatively, a 60o adaptor is also available for applications where it is preferential to hold the detector at an inclined angle perpendicular to the conductor/busbar, to improve visibility of the Westminster DS/MS/VA detector. For applications where a direct (in-line) application is preferred e.g. inside a cabinet with restricted access, the extension can be directly screwed into the main body omitting the adaptor.
Main Body
Houses the voltage detector.
Houses the voltage detector.
Handle
Provides suitable insulation from the voltage being tested and also provides storage for the main body when not in use. Two types of handle are available to suit the operating voltage.
Provides suitable insulation from the voltage being tested and also provides storage for the main body when not in use. Two types of handle are available to suit the operating voltage.
Customer Benefits:
- Robust construction
- Lightweight
- Full range of accessories
- Audible and Visual Warning
- 3.3kV, 5-12kV and 10-35kV operating ranges available
- Fully interchangeable component design
- Insulation tested
- Main Body stowage within insulated handle
