Welcome to Delta Sama Jaya Sdn Bhd

Delta Sama Jaya Sdn Bhd
23G & 23M, DSSB Building,
Jalan Perdana 6/8,
Pandan Perdana,
55300 Kuala Lumpur,
Malaysia.

+603 9286 6328
+603 9281 3778
+603 9282 4007
+603-9287 0705

Electrical

ELECTRICAL

We provide the best electrical products and accessories for use at high voltage and substation environments. Our products and accessories are of high quality and tested to meet the relevant regulatory standards and safety features.
 
 Cable Cleat

Cable cleats are devices designed and tested to ensure cable retention and support of cables and have been used for many years all over the world.
 Cable Slab

Manufactured from specially formulated high quality engineered plastic to provide the highest impact and tensile strength for the protection of underground cable or piping. It's ultimate interlocking linkage system will ensure the retention of the protection chain even under severe earth movement or impact.
 Cable Tray & Ladder System

A cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction.
 Termination Kit

Cable Termination Kits are widely used around the world for cable termination at distribution voltage up to 36kV.
 
 Cable End Cap / Heat Shrink Sleeve

Cable End Cap is used to seal the ends of all types of cables. Cable End Caps is to protect from ingress of water / moisture. Heat shrink Sleeve or Tubing is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work.
 Cable Identification System & Accessories

The Cable Identification system & accessories are the equipment used to label or marked the cables used. It is build with highly durable material that can withstand high-temperature and have high-durability.
 Cable Glands

Cable gland is a device designed to attach and secure the end of a cable to the equipment. It provides strain-relief and connects by a means suitable for the type and description of cable for which it is designed - including provision for making electrical connection to the armor or braid and lead or aluminum sheath of the cable if any. Cable glands may also be used for sealing cables passing through bulkheads or gland.
 Cable Tie

A cable tie is a type of fastener, for holding items together, primarily electric cables or wires. Because of their low cost ans ease of use, tie-wraps are appearing everywhere, finding use in a wide range of other applications. Stainless steel versions, either naked or coated with a rugged plastic, cater for exterior applications and hazardous environment.
 
 Cable Connector

Cable Connector / Cable Lug / Cable Terminal is a device that is used to join two or more electrical circuits together is called an electrical connector. These electrical connectors are typically utilized to set up temporary connections, though some may be used to install permanent ones.
 Cable Laying & Pulling Tools

Cable Laying Accessories are the equipment used in the cable installation. It is used to ease the installation, prevent injury to the workers and also proven damages on the installed cables. The accessories are based on the type of cables. Made using the best quality material, the cable accessories are built to handle the job.
 Lightning Protection System & Earthing Accessories

Earthing accessories are designed to protect cables and components from damage caused by sudden electrical power surges. Its main purpose is to reduce the risk of dangerous electrical shocks form unisulated metal parts of an appliance. Our Earthing accessories is a solution that delivers effective life safety, together with long lasting and reliable protection.

Lightning Protection System is designed to protect the structure form the lightning strike. A lightning strike can cause damage to the structure and also injuring and even kill people in or nearby the structure. The Lightning Protection System will redirect the high current flow form the lightning strike to the ground to neutralize it. The Lightning Protection System is made of either copper or stainless steel which is great conductor.
 Transformer Accessories

Transformer Accessories consist of Bushings, Breathers, O-rings, Corksheet gaskets, for transformer maintenance or repairs.
 
 SF6Gas Equipment & Accessories

Sulfur Hexafluoride (SF6) gas is widely used as electrical and insulating material for many years. The SF6 Gas equipment & Accessories provide the engineers to check or detect the gas leakage and to refill the SF6 gas in a safe way.
 ABC Accessories

Aerial bundle conductors (ABC) accessory includes numerous items for installing bundle cables on insulated conductors on posts / poles.
 Safety Signage & Locks

A safety sign is one which gives a specific message to those who may be exposed to hazards in the work environment. Lockout-tagout (LOTO) or lock and tag is a safety procedure which is used in industry to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or servicing work.
 Miscellaneous Substation Accessories & Others

Miscellaneous substation accessories and others consist of transportation cases, fordable gates and anti-condensation heater. These items focus on substation usage.


Switch to Mobile Version
available in
Recent Updates