CE62 SNAP-ON LINE END CLAMP

The Line End clamp (sometimes referred to as a phase or conductor clamp) is precision manufactured from a robust aluminium casting with stainless steel fittings. 

The CE62 incorporates a stainless-steel jaw, which is spring-loaded to reduce application and removal time associated with clamps of the screw type. CE62 is suitable for a conductor range between 4mm and 20mm. 

Three interconnected CE62 clamps can be loaded onto the Applicator Head for rapid, snap-on application to the conductors. Removal is again a quick action using the spike of the Applicator Head, by locating into the eye at the rear of the clamp and pulling firmly downwards.

Short Circuit Rating:           12.5 kA/1s

Applied with:                       DH1A or Applicator Head

Weight:                                 0.44kg

Part Number:                      EFD-16733