Welcome to Delta Sama Jaya Sdn Bhd

Delta Sama Jaya Sdn Bhd
23G & 23M, DSSB Building,
Jalan Perdana 6/8,
Pandan Perdana,
55300 Kuala Lumpur,

+603 9286 6328
+603 9281 3778
+603 9282 4007
+603-9287 0705

Standard Exothermic Welding Tools

Previous 4 / 7 Next

Standard Exothermic Welding Tools Exothermic Welding

Mold Cleaning Brush

Code : DSSB KTA 006

DSSB Mold Cleaning Brush is a tool consisting of a handle and brush. The brush is usually made from a large number of steel wire, brass or stainless steel depending on application. It uses to clean mold surface.

When cleaning stainless steel it is advisable to use a stainless steel bristle wire brush. Brass bristle brushes are used on softer surfaces or in potentially flammable environments where non-sparking tools are required.

Metal Bar Cleaning Brush

Code : DSSB KTA 003

For cleaning Flat surfaces of metal and Bar before putting into the mold.


Cable Clean Brush

Code : DSSB KTA 007

For cleaning Round conductors , earth rods and other circular object/ product.


Mold Scraper

Code : DSSB KTA 008-011

Scraper Code No.:DSSB KTA  008  009  010  011
For Weld Metal Powder (g) 15 - 32 45 - 90 115 - 250 above 300

Use for removing Slag from mold surfaces just after completing the exothermic welding process.

Flint Ignitor

Flint ignitor is used to ignite the ''Starting Powder/Material'' to start the exothermic welding process inside the mold.
Flint ignitor has to be place a few inches away from the mouth of the mold so that the spark can ignite the ''Starting Powder'' easily.

There comes in small size and handy. The mechanical flint ignitors gives long service cycles.
They produce a big sparks for ease of igniting the starting powder. The worn out flints can be replaced with new flints with minimal cost.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version
available in
Recent Updates