Welcome to Delta Sama Jaya Sdn Bhd

Delta Sama Jaya Sdn Bhd
23G & 23M, DSSB Building,
Jalan Perdana 6/8,
Pandan Perdana,
55300 Kuala Lumpur,
Malaysia.

+603 9286 6328
+603 9281 3778
+603 9282 4007
+603-9287 0705

J117-NSE Clamp

Previous 4 / 5 Next

J117-NSE Clamp Overhead Rail Earthing System Railway Safety Earthing Equipment Safety Earthing Equipment


 View Catalogue / Print




J117-NSE CLAMP





 
Product Description


The J117 rail clamp, or G Clamp is designed to fit to all types of rails, commonly use throughout the United Kingdom. The clamp is ruggedly constructed from steel which is zinc-galvanised to provide protection from site atmospheres. As well being used on Long Blue Earths, the J117 clamp is also fitted to the Short Circuiting Strap. The J117  rail clamp contact arrangement allows for the use upon both ‘Flat-Bottomed’ and ‘Bull-Head’ rail types. The body has an insulating shield fitted to prevent welding to the rail, should the clamp be subjected to a fault current. Secure location upon the foot of both ‘flat-bottomed’ and ‘bull-head’ rail types is provided by a hardened tip above the rail and a grooved block beneath the rail. The hardened tip fits into the operating screw with an insulating bush to ensure that the correct contact path is made. The grooved block fits directly on top of the copper busbar, ensuring a very low contact resistance path. The busbar sits upon a stack of disc spring washers, which should be fully compressed when the clamp is applied. These washers apply a pre-loaded pressure upon the rail in order to maintain firm contact through changing weather climates, whilst maintaining contact pressure should the clamp be subjected to fault current. The operating screw is rotated by a ‘tommy bar’ which is free to slide within the hole in the head of the operating screw. The tommy bar is retained at each end to prevent removal. The clamp is suitable for fitting via either 12mm or1/2″fasteners in the busbar.

 

Product Benefits

** Rugged construction and excellent corrosion resistance
** Suitable for corroded rail. Weight 1kg
** Suitable for’ Flat-Bottomed’ and ‘Bull- Head’ rail applications
** Fitted with springs to ensure secure location.

Product Specification

Item Code
DSSB-RAIL-PEE-J117-NSE(M)


Product Image










 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
available in
Recent Updates