Welcome to Delta Sama Jaya Sdn Bhd

Delta Sama Jaya Sdn Bhd
23G & 23M, DSSB Building,
Jalan Perdana 6/8,
Pandan Perdana,
55300 Kuala Lumpur,
Malaysia.

+603 9286 6328
+603 9281 3778
+603 9282 4007
+603-9287 0705

Substation Operating Sockets

Previous 2 / 8 Next

Substation Operating Sockets Substation Portable Earthing Equipment Field Equipment Portable Earth


Substation Operating Sockets


P&B Weir Electrical Ltd manufacture Substation Operating Sockets, the S9D ESI S1 and the CEA/S2 ESI-S2, using a light alloy material for both strength and ease of use.

These essentially support the line end clamp while being raised and lowered at the end of an operating pole and also rotate the operating screw of the line end clamp whilst being secured into position or being removed.

Socket type S9D ESI S1 supports clamps being applied in an upward direction. When the clamp is fully tightened the socket should be pushed gently up towards the clamp at the same time maintaining the tightening pressure and to which the socket will then automatically disengage.

Socket type CEA/52 ESI-S2 is an alternative type to the S9D where the operating screw of the line end clamp is controlled by means of a sprung loaded plunger in the socket. This socket is for application in a downward direction i.e. below the horizontal and for this reason is sprung loaded to ensure the clamp does not fall out of the socket inadvertently.
 

Customer Benefits:

  • Solid construction for extended service
  • Proven service record used by ESI for over 40 years
  • Light weight and good corrosion resistance
 

Further technical details:

  • The P&B Weir substation portable earthing equipment range including substation operating sockets is designed to ENA technical specification 41/21.









 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version
available in
Recent Updates