View Catalogue / Print

LEGEND™ 2-PART LABELS (LASER PRINTING)

Product Description 


The key benefit of the 2-part system is that the wire ID can be changed even after termination without cutting off the wire.

The system consists of a clear plastic tubing with 2 recesses; one for the label and one for the wire. The label recess remains same size. The wire recess changes according to diameter of wire to be marked . Diameter range: 1.2mm to 14mm. There are 3 different label lengths: 20mm, 30mm and 50mm with matching lengths of clear tubing. The flexible polypropylene label has a special ‘bottle’ shape allowing it to be pulled into the clear tubing, this style makes it quick and easy to ‘load/unload’ label.

Typical uses include; sub-stations, control rooms or any application where the ID is likely to need frequent changes.

 

Testing

This label has been tested for High/Low Temperature and Salt Mist Spray according to Lloyds Register Type Approval System.
 

Colour Options

White – also consider Red/Blue/Green/ thermal ribbons.
 

PRINTING

Print via Fox-in-a-Box® thermal printer using One software, One printer, One ribbon for our whole range of thermal labels.

A 300m thermal ribbon will yield approximately 40,000 labels.





Product Specification